| BeoGram 2200/2400 were identical except
that, when coupled to the BeoMaster 2400, BeoGram 2400 could also be operated
by remote control. To play records on either model it was necessary to simply press START and let the automatic system do the rest. As an additional safeguard, all functions could be operated with the protective lid closed. The electronic servo drive system kept turntable speed constant and correct, even during fluctuations in the mains supply. Careful arm geometry ensured that tracking angle was kept well below the level where it could affect the quality of the reproduced sound. Bias effect was compensated automatically and needed no adjustment. The extreme lightness of the arm, together with the highly polished elliptical diamond carried by the MMC 20E pickup, resulted in an unusually low Effective Tip Mass (ETM). This means that your records would suffer very little wear, even after continual playing. Neither would they be damaged if the stylus was accidentally skidded across the surface. BeoGram 2200/2400 could be made up as part of the BeoSystem 2200 when linked together with other compatible Bang & Olufsen products. Finish: teak, rosewood, oak, white |
| How to handle your records" Collecting records is rather like collecting books. How much pleasure you can get and for how long (i.e. how many times you can play a record) depends on how you handle it. Friction, created when you remove a record from its sleeve, can give rise to static electricity causing the record to attract dust. Hold the sleeve so that the sides bend outwards from the record. Place your index finger in the centre and your thumb on the edge of the record. Do not touch the grooves. Remove the record carefully. Only the edges should touch the sleeve. Replace by reversing the procedure " 1974 B&O Catalogue |
| BeoGram 2200 Specifications |
| Types:5721 (1978 - Feb 1980) F 5723 (1978 - March 1980) |
| Speeds 33 - 45 rpm Speeds control range > +/- 3 % Wow and flutter < 0.06 % Rumble weighted > 65 dB Rumble, unweighted > 45 dB Drive system Flat Belt Motor Servo controlled DC Power supply 220 (110) V Power consumption 8 W Dimensions W x H x D 44 x 8.5 x 37cm Weight 6.5 kg Pick-up MMC 20 E Recommended tracking force 15 mN / 1.5 g Frequency range 20 - 20,000 Hz +/- 2.5 dB Stylus: elliptical diamond Pick-up MMC 20 EN Recommended tracking force 12 mN / 1.2 g Frequency range 20 - 20,000 Hz +/- 2 dB Stylus: elliptical naked diamond |
| Hvis du ønsker flere oplysninger om B&O produkter så tryk www.beoworld.co.uk/ |